Saturday, November 12, 2016

Simple Steps To Be Followed In A Chimney Cleaning

By Christine Scott


A chimney is a type of a structure which will provide ventilation from smoke or flue gases which are coming from fireplaces, furnaces, stoves, or boilers into an atmosphere outside the house. Typically, these structures are vertical in position in order to ensure that the gases will be flowing upwards in a smooth manner. The flue is a space located inside the chimneys. A chimney is often used in most ships, buildings, and steam locomotives.

Burning fires that may come out from chimneys can sometimes be difficult to avoid. These may cause fire because of some substances like soot and creosote which are flammable and sticky. Doing a chimney cleaning Windsor Locks CT may be done if you will be hiring a professional to do the job, but this may cost you much. So here are some simple steps that you can follow to do a safe cleaning by yourself.

The following steps are to be done in 4 methods. First preparing to clean the chimneys. Before you start, you must have to determine if the chimney will be needing the cleaning process. It would be important that the chimney is cleaned once a year. If these are used more frequently, to clean it often is needed. Also try to check some animals living in it sine at times, you may not check it for a while.

The next step is measuring its flue. If you are doing all the methods for cleaning, see to it that you are making use of the appropriate tools and these have to be in appropriate sizes to fit the flue. All sides of the fireplace and also up to the top part must be measure properly. There are some hardware stores in your local place where in you can purchase the needed materials.

You must also dress appropriately. You may use your old clothes so that you will not mind on getting messy because of the soot. A bandanna can be used for covering the hair. Use gloves for protecting the hands and goggles for the eyes. Place the drop cloth or the plastic tarp on the floor to avoid the house from getting dirty. Look for the damper then clean it with the brush.

Second is to start cleaning the top then down to the bottom part. You need first to set up the ladder to be used in climbing the roof. You may also set up your ladder outside the house and lean it into house, but be sure that it is safe. So start by assembling the pipe section and brush to scrub the flue. The pipe may be added with many sections as the extensions for the brush.

Third is cleaning from bottom to the top. The same steps will apply when using pipe sections and a brush for flue scrubbing. Then after those steps, clean from bottom then to the top by the use of a pulley system together with brush. Place the pulley on top of the roof.

In this step, it might be helpful if you are going to hire someone for holding one side if the rope from the roof then the other side will be dropped. At the center of a pulley is the brush. Then work with your partner together by pulling that pulley rope in an up and down manner. It works by scrubbing the brush in chimney flue.

Then lastly is to clean the entrance of flue by the use spade and shovel. Then after, reattach the removed damper handle. The plastic tarp or the drop cloth may have some debris, so it can be cleaned by a broom and a dustpan.




About the Author:



No comments:

Post a Comment